Don’t be alarmed if you go to charge your iPhone and the “Liquid Detected in Lightning Connector” alert appears. This is a very common warning. The iPhone alert “Liquid Detected in Lightning Connector” indicates that your phone’s charging port is wet.
You can continue to use your phone, but you won’t be able to charge it with a lightning cable until the port is completely dry. You can, however, use a cordless charger while you wait! You plugged a Lightning cable into your iPhone, but you immediately got a scary pop-up.
You’re not sure why it says “Liquid Detected In Lightning Connector.” In this article, I’ll explain what to do if your iPhone reports that there’s liquid in the Lightning connector! Apple frequently releases beta versions for testing in order to ensure that new updates are user-friendly and free of bugs.
However, as seen on various forums such as Reddit, a “Liquid Detected in Lightning Connector” message has been troubling iOS 14 and 15 users. Let us shed some light on this.
Look through the page to see if there are any issues that are similar to yours. If you still require our assistance after that, please fill out our Android issues questionnaire to get in touch with us.
WHAT DOES IT MEAN WHEN THERE IS LIQUID IN THE LIGHTNING CONNECTOR
“Disconnect lightning accessory,” says the error message. The Lightning connector has been contaminated with liquid. To protect your iPhone, unplug this Lightning accessory and allow the connector to dry.” appears when your Apple iPhone X, or any iPhone running iOS 10 or later, detects moisture in the lightning connector.
This is one method for the iPhone to avoid liquid damage because, even if it has the IP67 certification, water can still enter the device and wreak havoc on the circuits.
The “lightning connector” is simply another name for the charging port on your iPhone. The “Liquid Detected in Lightning Connector” alert indicates that either your phone’s charging port or the lighting charging cable is wet or moist. There are numerous possibilities, but here are a few of the most common:
- Shower – If you leave your iPhone in the bathroom while you shower, humidity levels can rise significantly, causing moisture to accumulate inside your charging port.
- Rain – If you are caught outside during a rainstorm or even a light shower, your phone may become wet.
- Pool – putting your phone in your pocket and jumping in the pool will almost certainly get it wet!
- Spilt drink – spilling a coffee or water on your iPhone is another sure way to get it wet
Ok, so I left my phone in the bathroom while I showered. What’s the big deal? Isn’t my iPhone already water resistant? The warning, however, does not always imply that the lightning port is wet or has a trace of moisture in it.
It could also be other lighting accessories that you use. The thing is, when it appears, you can be sure that the moisture is still present, and it’s a good thing Apple included this feature in its devices so that owners can take the necessary precautions to avoid further damage from the liquid.
So, if you own an iPhone X and are currently experiencing this issue or error, keep reading as this post may be able to assist you.
WHY DOES MY IPHONE SAY “LIQUID DETECTED IN LIGHTNING CONNECTOR”?
If you have an iPhone XS or later, it can detect liquid in the Lightning port. When this occurs, your iPhone may display a Charging Not Available error message that states “Liquid has been detected in the Lightning connector.”
If you see this message on your iPhone, unplug it from its charger and set it aside to dry for a few hours. While your iPhone is drying out, avoid plugging anything into its Lightning port, such as headphones or another charger. The liquid in the Lightning port has the potential to permanently damage your iPhone’s hardware.
We do not recommend pressing the Emergency Override button to charge your iPhone. If your iPhone supports wireless charging, charging it with a Qi-enabled wireless charger while your charging port dries may be safer.
However, if your iPhone was exposed to a lot of water before this error message appeared, you should probably avoid wireless charging as well; liquid may have spread to other components of your iPhone.
WHAT IF MY IPHONE IS WATER RESISTANT?
Water-resistance is built into every iPhone in Apple’s current lineup. Actually, if you have an iPhone 8 or later, it is water-resistant. However, just because your phone is water-resistant does not mean it is immune to liquid damage.
Waterproof iPhones are not available. This means that if the metal components inside your phone come into contact with any kind of liquid, they will corrode and stop working properly. The metal pins inside your lighting port are the same way.
However, because there is no electrical current passing through these metal pins, the liquid should not cause any long-term damage (unless it leaves residue on the pins). As a result, when your phone detects liquid, Apple automatically disables the lighting connector. A current could corrode the metal and cause the connector strip to stop working.
When an error appears, the logical thing to do is to follow it. If you have a lightning accessory connected to your iPhone, unplug it right away. The error message must be taken seriously because the phone most likely detected moisture in the port.
SUGGESTED POSTS:
- How To Fix Samsung TV Wont Turn On Issue? (Easy Guide!)
- How To Fix Vizio TV Keeps Restarting Issue? (Easy Complete Guide)
- How To Reset Vizio TV That Won’t Turn On? Read Here
WHAT TO DO IF A LIQUID HAS BEEN DETECTED IN A LIGHTING CONNECTOR
First and foremost, I strongly advise you to avoid using the “Emergency Override” option and instead give your phone enough time to dry. You can even continue to use your phone as is! Simply press the “Dismiss” button.
That should not be an issue and will not result in any additional damage. Just don’t connect anything to it! I would take the following steps to ensure there is no permanent damage and to get your phone working again:
- Unplug any cables or accessories that are attached to your iPhone.
- Hold your iPhone with the Lightning port facing down, then firmly tap it with your palm to help get any liquid out of the port.
- Place your iPhone in a well-lit, well-ventilated, and dry location.
- wait a minimum of 30 minutes before trying to charge your device again
If you receive the “Liquid Detected in Lightning Connector” alert again, liquid residue may be present beneath the Lightning pins.
You should wait at least 30 minutes before attempting to charge it again. Repeat this process until the alert is removed. Many iPhone users have told me that it took up to 24 hours for their phone to fully dry and the alert to go away. So please be patient!
HOW TO USE CORDLESS CHARGING?
The good news is that the advice I provided above is based on the assumption that you only have a lightning cable charger. If you have a cordless charger, you can use it while the lightning port dries!
So you can not only use your phone, but also charge it while you wait for it to completely dry out. This has literally just happened to me. I was bathing my son when my iPhone fell into the tub and was completely submerged for about 10 seconds.
I received the Liquid Detected in Lightning Connector warning message when I went to charge it with the lighting cable. So I kept using my phone and later that day, when it was time to charge it, I used my cordless charger. It worked perfectly.
My phone was completely dry the next day, and the lightning charger was functional once more. If you don’t already have one, Apple sells a cordless charger called the MagSafe charger, but there are also a plethora of after-market options on Amazon.
Keep in mind that an iPhone 8 or later is required! Previous models did not support wireless charging. An hour or two is sufficient to allow the moisture in your iPhone’s lightning port and the accessory to dry.
Turn on your iPhone X to see if the error persists, or connect the accessory to see if the error is triggered. If it still appears, you should probably take it to an Apple store and have it checked because there could be something causing the error.
Given Apple’s strict warranty policies, you are not permitted to experiment on your device, let alone attempt to open it in any way. That is why you require the assistance of an Apple technician to determine the true nature of the problem.
Alternative Video: How To Fix Liquid Detected in iPhone Connector Bug?
WHAT TO AVOID DOING WHEN A LIQUID HAS BEEN DETECTED IN A LIGHTING CONNECTOR?
There’s a lot of bad advice for liquid-damaged iPhones online. The majority of this advice does nothing to repair your device and, in many cases, causes more damage! I know it’s tempting to try to speed up the drying process, but don’t do any of the following:
- Place your phone in a container containing rice or silica gel packets.
- Avoid using a heat source, such as a radiator or hair dryer, to dry your iPhone.
- Insert nothing into the Lighting port, such as QTips or a napkin.
Again, the best advice is to simply wait it out and let your iPhone dry naturally over time. I know it’s not what you wanted to hear, but bear with me: be patient! Can you try using a hair dryer or sticking a napkin in the charging port to speed things up? Sure. However, keep in mind that you run the risk of permanent damage.
WHEN TO OVERRIDE THE LIQUID DETECTION ALERT?
While it certainly shouldn’t be your first choice, there are times when you may want to risk damaging your iPhone in order to charge it, even if it’s wet. In these emergency situations it’s possible to override the alert and charge your device.
It’s worth repeating that doing so puts your phone in danger of being permanently damaged. Water and electricity do not go together! However, if you do choose to ignore the warning, you should first thoroughly dry the outside of your iPhone and consider charging it wirelessly instead.
Simply reconnect the lighting cable or accessory shortly after the liquid detection alert appears to override it. Tap the “Emergency Override” button when the liquid detection alert appears again.
EMERGENCY OVERRIDE NOT WORKING
Despite the alert, most of the time, selecting “Emergency Override” will allow you to charge your iPhone. However, when you click this override, the alert disappears but your iPhone continues to refuse to charge.
This appears to be a bug that Apple has yet to fix. Fortunately, there are a few things you can do to fix/avoid this:
- Press the dismiss button to force restart the iPhone. Press and hold the side button until you see the Apple logo flash on the screen, then press and hold the volume up and volume down buttons.
- Authentic Apple chargers should be used! For whatever reason, aftermarket chargers cause this alert.
- When possible, use MagSafe charging to charge wirelessly.
WHAT IF MY IPHONE DETECTS LIQUID WHEN IT’S DRY
You may see the liquid detection alert even if your iPhone and Lightning connectors are completely dry. Perhaps your phone is brand new, or you gave it plenty of time to dry out. If this is the case, use a flashlight to inspect the Lightning port for dust and debris.
Obstructions in the Lightning port can cause your iPhone’s liquid sensors to malfunction. If you find anything, use compressed air to clear it out to avoid damaging the metal pins.
If you can’t see any debris after flashing a light into the port, there’s a good chance your iPhone’s Lightning port or the accessory you’re attempting to use is damaged. You may need to contact Apple support at this point.
CONTACT APPLE
If your phone did sustain water damage, the Apple One-Year Limited Warranty does not cover liquid damage repair. You can check your phone’s Liquid Contact Indicator to see if this is the case (LCI). When the LCI comes into contact with water, it turns red.
The location of the LCI is determined by the model of iPhone you own. Fortunately, Apple has created this helpful chart to assist you in locating it. If you are unsure whether liquid exposure is causing the alert, contact Apple Support for assistance.
If you require additional assistance with the use of specific functions and features of the new Apple iPhone X smartphone, please visit our Tutorial Page. There is a list of how-to contents, step-by-step tutorials, and answers to frequently asked questions about iPhone 8.
If you have any other questions or encounter any problems while using the phone, please contact us using this form. Please provide us with more information about the problem or device issue(s) you are experiencing, and we will gladly assist you further.
CONCLUSION Liquid Detected in Lightning Connector
Having liquid stuck in your phone or receiving messages like “Liquid detection in Lightning Connector” for no apparent reason causes a lot of problems for the user.
We recommend that you employ the methods outlined in the article. Tenorshare ReiBoot can help you recover your iPhone safely. There will be no problems with data loss.
You no longer have to be concerned about the message interfering with your phone experience. To resolve issues with liquid detection in the lightning connector, a simple solution can be applied via Tenorshare ReiBoot.
Don’t be alarmed if your iPhone gets wet and you see the “Liquid Detected in Lightning Connector” alert; this is a very common alert. What you should do is as follows:
- unplug any cables or accessories connected to your iPhone
- hold your iPhone with the Lightning port facing down, then firmly tap your phone with the palm of your hand to help ease any liquid out of the port
- place your iPhone in an open, ventilated, and dry space
- wait a minimum of 30 minutes before trying to charge your device again
Unless it’s an emergency, I would strongly advise against using the Emergency Override option. Charging your iPhone when the Lightning connector is wet can cause permanent damage to your phone. The best thing to do is wait for your phone to air dry. Just be patient!
Frequently Asked Questions
What do you do when your iPhone says liquid detected?
If you see this message on your iPhone, unplug it from its charger and set it aside to dry for a few hours. While your iPhone is drying out, avoid plugging anything into its Lightning port, such as headphones or another charger.
How do I remove the liquid from my charging port?
In comparison to simply leaving it to dry on the dining table, a fan is concentrated, the air is dry, and it is consistent, allowing all parts of the charging port to dry faster. Placing your Android or iPhone in front of a fan after wiping it down with cotton wool or a dry cloth actually works better.
How do I get water out of my Lightning connector?
To get rid of excess liquid, gently tap your iPhone on the palm of your hand with the lightning connector facing down. Put your iPhone in a dry, well-ventilated location. Try charging with a lightning cable or connecting a lightning accessory after at least 30 minutes.
Will the moisture notification be removed?
Because plugging in the charger sets off the alarm, it’s best to avoid doing so until the port has dried. Samsung recommends gently shaking the phone (right-side up) to encourage any trapped water to fall out, and predicts that water will evaporate naturally within one to two hours.
