shutterstock 414219292

Samsung produces some of the best televisions on the market. However, as with any television show, things may not go as planned. When your television fails to turn on, it can be extremely frustrating because, quite frankly, displaying content is its primary function.

If your Samsung TV does not turn on but the red light flashes or blinks, it could be due to a faulty power supply. In this case, you’ll have to replace it, which can cost anywhere from $200 to $350 if it’s out of warranty. It’s also possible that the HDMI port has a flaw.

We’ll go over the various reasons why a Samsung TV won’t turn on and what to do if this happens in greater detail. If you want to learn more, keep reading. When your Samsung TV won’t turn on, try resetting it by disconnecting the power cord from the outlet and pressing and holding the TV power button for at least 10 seconds.

How To Fix Samsung TV Wont Turn On Issue?
How To Fix Samsung TV Wont Turn On Issue?

After a couple of minutes, reconnect the TV and turn it on. There are three possibilities: the standby light is red and flashing, the standby light is not working, or the standby light is green.

Blinks on Samsung TVs usually indicate a faulty power supply. If you notice it isn’t working, it’s because of a power outage. If the standby light is green, there may be a problem with the panel.

One of the most infuriating things is coming home at the end of a long day and going to turn on the TV and getting no response. Although Samsung equipment, manufactured by the well-known South Korean company, has always been regarded as one of the most dependable, it can occasionally fail.

The first and the most important stage of repair work is to find out why the Samsung TV does not turn on and the diagnostic results will show the cause of the failure. Depending on the complexity of the malfunction, you need to fix it yourself or contact a specialist. Below is a list of things you can try to find the reason why your Samsung TV won’t turn on but first, let’s go into the causes.

SAMSUNG TV WON’T TURN ON

If your Samsung TV won’t turn on you need to reset it. Unplug your TV and wait a full 60 seconds. While the TV is unplugged, press and hold the power button for 30 seconds. After the 60 seconds are up, plug your Samsung TV back in and it should work.

If your Samsung TV won’t turn on, try unplugging it for about 30 seconds and unplugging all HDMI devices as well. Plug in your TV again, then try turning it on with the remote first, then the power button; if that doesn’t work, your power supply may be broken.

We recommend watching this short Samsung video on how to troubleshoot this problem. If you are still experiencing difficulties, please contact Samsung:

Samsung TV Won’t Turn On

Don’t call a repairman just yet if your Samsung TV won’t turn on. You have the option of diagnosing the problem and resolving it on your own, which will save you money. Even if you don’t consider yourself a techie, resetting one of these TVs is relatively simple.

So, how do you reset a Samsung TV that won’t turn on? Simply unplug the power cord and hold down the TV’s on/off switch for 10 seconds if it is not already unplugged. Remove your hand from the button, reconnect the TV, and wait for the Samsung TV to turn on after being reset.

Continue reading to find out how to reset a Samsung TV that won’t turn on. This article goes into great detail about what to do and how to diagnose the problem. Continue reading to find out more.

WHAT WOULD CAUSE MY SAMSUNG TV TO NOT TURN ON? 

To figure out why your Samsung TV won’t turn on, you must first inspect the device for external damage before proceeding to the diagnosis of the hardware component. Here are a few possible explanations:

  • Standby mode: The device continues to function when the red light remains illuminated and the display is turned off. To turn on the TV, press the power button on the device’s front panel or the remote control.
  • You shattered the remote control. First, replace the batteries and double-check all of the keys. You can always download a special app on your smartphone – TV-remote – to switch channels and adjust the volume using your regular phone.
  • Broken socket. If the indicator does not light up on the control panel, connect the TV to an alternate power source. After that, you can continue to use the device.
  • This failure is most likely caused by the activation of an AV, HDMI, or wireless internet connection. As a result, an image from a smartphone or laptop appears on the screen. Simply turn off all devices and check all connected hdmi to vga converters to resume watching terrestrial TV.
  • Signal strength is low. Due to a weak signal, only a black screen is visible on the TV screen, which is frequently caused by adverse weather conditions such as excessive precipitation, thunderstorms, and so on. Do not take any action right away; the broadcast will most likely resume in a few hours.
See also  Why Your Roku TV Is So Slow? (Find Out How To Make It Faster)

To independently determine why the TV does not turn on, you do not need specialized equipment. Now let’s analyze the main breakdowns that users encounter most often.

READ ALSO:

SAMSUNG TV NOT TURNING ON, RED LIGHT FLASHING

You walk over to your television to begin a session of media streaming, TV viewing, or gaming. You simply want to relax and enjoy your evening after a long day of work. You sink into your seat and reach for the remote.

You proceed to press the remote’s power button, but nothing happens. You press again and again, perhaps giving it another shot, but it’s futile. You suspect that the batteries are dead and decide to turn on the television.

As you approach the television, you notice the red light flashing. When you press the power button, the red light goes out. When you press it again, the light returns—but nothing appears on the screen.

If you’re here, this is at least somewhat similar to your current situation, and believe us when we say we understand how you feel right now. This, along with screen shattering, is one of the most terrifying things that can happen to a television.

When technology fails, it is critical to take a deep breath and consider what went wrong. Below, you will find some of the reasons why a Samsung TV is not turning on.

How To Fix Samsung TV Wont Turn On Issue? - (Easy Guide To Follow!)
How To Fix Samsung TV Wont Turn On Issue? – (Easy Guide To Follow!)

1. The Power Supply Has Gone Bad

A TV simply will not work if the power supply has been compromised. It is unusual for them to stop working suddenly without a known cause. The most common reason for a power outage is an electric shock caused by a lightning storm. Your devices and appliances can only handle so much electricity before they become overloaded and break, and lightning is no laughing matter when it comes to electricity.

Lightning can strike down and travel through the wiring in your walls, shocking anything plugged directly into an alternating current outlet, including your television. This surge of electricity is powerful enough to fry the circuit boards on a television, which is why using a surge protector is critical for protecting your belongings.

Fortunately, if you have Samsung Care+, your warranty will cover this type of damage. Depending on your model, a replacement power supply/circuit board will cost around $300. On high-end TVs, we always recommend getting a premium warranty, as long as the warranty is reasonably priced. A good rule of thumb is that the warranty should not cost more than 10% of the product’s purchase price.

See also  How To Fix Liquid Detected in Lightning Connector? (Easy Methods !)

It’s also possible that the power supply was defective from the start. This happens less frequently, but it is entirely possible. If you are still within the terms of your standard warranty, you should have no trouble getting a free repair for your TV.

2. HDMI Glitch

In some cases, a game console can prevent a TV from turning on due to an HDMI (input) bug found in Samsung TVs. This is caused by turning off the console without changing the source of the HDMI input. When this occurs, the game console may prevent the TV from properly booting up.

3. Surge Protector Isn’t Working

Surge protectors can occasionally fail. They are plugged into an alternating current outlet, which means they, too, can have problems that affect anything plugged into them. To see if your surge protector needs to be replaced, try plugging the TV directly into the wall.

4. The Wrong Source Is Selected

This comes down to user error and is a relatively common mistake. It is entirely possible that your TV isn’t turning on due to the incorrect source being selected or the source itself isn’t connected properly. 

SAMSUNG TV NOT TURNING ON BUT RED LIGHT IS ON

If your Samsung TV is not turning on, but the light is on, try power cycling the TV by unplugging the TV from the wall and pressing the “Power On” button for 15 seconds on the TV. Then, reconnect the TV and turn it on. The launch configurations can become corrupted and need to be reset from time to time, and following these steps will restore the settings to factory defaults.

There’s a good chance your TV works fine, but it’s connected to the wrong source or isn’t plugged in properly. Tap the screen to see if it blinks to see if everything is working properly. If it does, the screen is operational; however, there is no image that can be displayed.

SAMSUNG TV WON’T TURN ON, JUST FLASHES

If your Samsung TV won’t turn on and the light just flashes, this is likely due to a power supply that has gone bad due to it being faulty, or it has been shocked during a lightning storm. If you have Samsung Care+, you will be able to get it repaired.

Samsung TV Wont Turn On
Samsung TV Wont Turn On

SAMSUNG TV NOT TURNING ON AFTER POWER OUTAGE

If your Samsung TV does not turn on after a power outage, unplug it and press the power button on the TV for at least 10 seconds. Wait 3 minutes before plugging the TV back in and turning it on.

If the light blinks, it indicates a faulty power supply. Power outages are damaging to electronics and can result in the power supply failing.

SAMSUNG TV NOT TURNING ON, RED LIGHT OFF

If your Samsung TV does not turn on at all and the red light is not on or flashing, this indicates that no power is being delivered to the TV. The first step is to try a different AC outlet or circuit protector. It’s also possible that the power cord isn’t fully plugged in, in which case you’ll need to give it a firm push.

If this does not work, you may need to dissipate the residual power on the television. Unplug the TV and hold the power button down for 30 seconds before plugging it back in and turning it on.

It is unusual for a television to die completely out of nowhere. Even if the circuit board has been fried by an electric shock, the red light should illuminate to indicate that something is wrong. If the TV still does not turn on after following these steps, contact Samsung and explain your problem.

CONTACTING THE SAMSUNG SERVICE CENTER

If you’ve tried everything and your Samsung TV still won’t turn on, the last resort would be to contact the service center, whose employees will be able to quickly determine the cause of the malfunction and restore the device’s normal operation.

See also  Yellow Light On Garage Door Sensor: How to Fix? (9 Ways!)

To diagnose the problem, they would have professional equipment and licensed software at their disposal, such as spacers, multimeters, oscilloscopes, and so on. A professional engineer can only fix hardware problems with the Samsung TV; an average user can fix problems of an external nature.

Disassembling a device on your own is not a good idea, especially if you don’t know what you’re doing. Software failures on Samsung Smart TV are also not always easy to resolve on your own. To update the firmware, first download it and save it to a USB flash drive or the internal hard disk.

This task will not be completed by every user. Engineers at service centers have access to specialized equipment and are well-versed in TV disassembly. If you’ve exhausted all of your options, it’s time to contact Samsung’s Support Team.

CONCLUSION on Samsung TV Wont Turn On Issue

Don’t be concerned if your Samsung TV does not turn on properly. There are numerous potential issues, and the majority of them can be resolved in a matter of seconds. If you need to reset your Samsung TV because it won’t turn on, all you have to do is perform a factory reset.

Again, this is very simple and only requires you to unplug the TV and hold down the power button for 10 seconds. This reset should be simple enough for even a child to perform! However, before resetting your Samsung TV, check all of the red light indicators to ensure that something simpler is not the problem.

The issue could be as simple as dead batteries or an unplugged cord. When using a device with a liquid crystal matrix, the factors will be significantly different from the same LED models. You should unplug all of your extra plugins to see if they are the source of the problem.

This could be an error code from your PS4, Xbox, or any hdmi to vga converters or external devices connected to your Samsung TV, such as soundbars (good options on this site), speakers, and surround sound systems. Unplugging them will assist you in determining whether they are causing your Samsung TV to not turn off.

Samsung TV Wont Turn On Issue
Samsung TV Wont Turn On Issue

FAQs About Samsung TV Issue

What does it mean when your Samsung TV won’t turn on?

If your Samsung TV won’t turn on, try unplugging it for about 30 seconds and unplugging all HDMI devices as well. Plug in your TV again, then try turning it on with the remote first, then the power button; if that doesn’t work, your power supply may be broken.

How do I force my Samsung TV to start?

Is it possible to restart my Samsung frame television if it will not turn on? To begin, unplug all of the television’s cables and press and hold the ‘Power’ button on the remote control for up to 10 seconds. After that, you must wait a few seconds before pressing the Power button again.

How do you troubleshoot a Samsung that won’t turn on?

Restart Your Samsung Galaxy Manually. A force restart causes your phone to turn off and then back on. This type of restart has no effect on your phone’s data. To force restart your Samsung Galaxy, press and hold the Volume Down and Power buttons at the same time for 10–20 seconds.

Why won’t my Samsung TV turn on no red light?

If your Samsung TV won’t turn on and isn’t displaying the red light, check the power outlet into which it is plugged to see if there is a problem. If the power is properly plugged in, check the sleep/standby status of your television to ensure that it is not the source of the problem.

Similar Posts