How To Fix Vizio TV Keeps Restarting Issue? (Easy Complete Guide)

After completing the setup process for your Vizio TV, you should be able to keep the TV on and access any applications or other satellite/cable channels within it. How do you fix the problem of the TV restarting repeatedly during setup or after an update?

If your Vizio TV repeatedly restarts during setup, after an update, or will not restart, try a few different power cycle methods, consider that multiple updates may need to be installed sequentially, check if the outlet you’re using has the proper voltage, or perform a factory reset.

It is necessary for any Vizio TV to restart after an update has occurred, as this allows the new firmware to take root and begin operating. However, once the process has been completed, there should only be one restart.

If you have updated your Vizio TV and it will not stop restarting after being set up, after an update, or will not restart at all, look below to find the specific issue you are experiencing and the solution to resolve it.

How To Fix Vizio TV Wont Turn On Issue? (10 Solutions!)

VIZIO TV KEEPS RESTARTING

Before we get into restart issues caused by updates, let’s talk about the problem that owners have had with their Vizio TVs constantly restarting. Restarts are warranted and necessary from time to time, but if your TV is restarting at all hours of the day with no pattern or warrant, it can be a major disruption to your television experience.

Read on for a solution if your Vizio TV keeps restarting. If your Vizio TV keeps restarting, you may need to power cycle it more thoroughly than usual. To do this, unplug your TV from the power outlet and leave it unplugged for at least one hour.

For 60 seconds, press and hold the power button on the back of the TV. While still holding the power button, plug the TV back into the wall outlet and turn it on to see if it restarts. If there are no more problems, your problem has been resolved.

VIZIO TV KEEPS RESETTING

There is a distinction between restarting and resetting in that restarting is simply turning off and back on, whereas resetting is actually reconfiguring data within the TV and restarting once completed.

If you have a Vizio TV and notice that it is constantly pausing to reset, this can be even more inconvenient than restarting because it takes longer to complete. What should you do if your television keeps resetting itself?

If your Vizio TV keeps resetting, power off the TV and unplug it from the power outlet and disconnect all devices from the TV. Press and hold the power button on the TV for 30 seconds, release, and plug the TV back in. Reconnect all previously connected devices and turn the TV back on.

VIZIO TV KEEPS UPDATING AND RESTARTING

The moment a Vizio TV updates and restarts is more advanced and involved than resetting. A Vizio TV receives the latest firmware update during an update, which helps to fix any bugs within the TV and allows other functions to run more smoothly.

This is absolutely necessary; however, it is not something that happens frequently and quickly, which can leave owners with this problem quite distraught.

If your Vizio TV keeps updating and restarting, it’s possible that your TV has multiple updates pending that need to be applied sequentially. If this is the case, the TV will reboot after one update and then proceed to another, causing it to restart several times in a matter of hours.

Alternative Video: Vizio TV Keeps Restarting

READ ALSO: How To Fix Vizio TV Wont Turn On White Light is On Issue? (8 Easy Fixes)

VIZIO TV KEEPS RESTARTING DURING SETUP

When you bring home a new Vizio TV, you will be required to connect all of your personal information to the TV, such as setting up WiFi, connecting cable or satellite, and downloading applications that you intend to use frequently.

For some, this can be a lengthy process that leaves them extremely frustrated when their TV keeps restarting during the setup process. How do you get it to stop and start again? If your Vizio TV repeatedly restarts during setup, the voltage current coming from the outlet may be fluctuating too much.

Plug a voltmeter into the outlet to confirm, and if the current value is too low or fluctuating, you may need to find another outlet or replace the current one. If this is not the case, a power cycle may be enough to reset your TV without requiring any further investigation. This is covered in the preceding section, “Vizio TV Keeps Resetting.”

How To Troubleshoot Vizio TV Wont Turn Off? (Easy Fixes To Try)

VIZIO TV WON’T RESTART AFTER UPDATE

If you had no problems with your Vizio TV during the setup process but notice that it has either automatically updated or that you have manually induced an update, you would think that the new firmware installation would solve all problems.

Although this would be ideal in an ideal world, some Vizio TV owners have reported issues with their TV refusing to restart after the update appears to have been completed. What can you do to fix this?

If your Vizio TV does not restart after an update, check to see if there is any power. With the light at the bottom of the TV turned on, press the power button on the TV to see if a light appears. There is a problem with the TV if it flashes from orange to white after more than two minutes.

If the power light comes on, but you see no picture, this could be an issue with the picture. If you have a new Vizio TV, the white LED light will fade out when the TV is on. If the light does not fade but turns right off, there is a problem with the TV and you check on eligibility for warranty or a service request.

CONCLUSION

Resetting the TV and leaving it unplugged are two of the many possible solutions. Feel free to play around with your TV and see what works for you. We hope the methods mentioned above were helpful in repairing your television. Have fun streaming!

FAQs About Vizio TV Restarting