How To Fix Fire TV Flashing Yellow Light? (4 Easy Solutions!)

How To Fix Fire TV Flashing Yellow Light? No, your Fire TV isn’t going to die. Since the yellow light of death (YLOD) impacted numerous gaming consoles in 2006, the yellow flashing light has frequently been a source of concern when it is associated with a problematic device.

However, while the yellow light indicated impending death for these devices, it is far from fatal for your Fire TV.

If you experience a Fire TV flashing yellow light, there is most likely a connection issue.

The speed at which the light flashes is important because it could indicate that your remote is in discovery mode isn’t paired or has a poor Wi-Fi connection. Alexa will be unresponsive, and the Fire TV Cube will have a pulsing yellow light.

Technology is wonderful until it isn’t. The last thing you want to deal with after a long day is a connection problem when you sit down to unwind and watch TV. Fortunately, there are several options for getting your Fire TV up and running again.

We’ll go over some troubleshooting steps for your Fire TV below.

REASONS FOR FIRE TV FLASHING YELLOW LIGHT

As said before, there are lots of reasons causing these issues. Let’s make it simple and list it below to be easy for everyone to sort it out.

• Low Battery 
• Poor Wifi Connection
• Firmware Issues

These are the reasons that cause your FirestickFirestick remote to blink yellow light.

HOW TO FIX THE FIRESTICK REMOTE BLINKING YELLOW LIGHT?

The reason for the Firestick Remote’s yellow blinking light is a low battery. So your Firestick remote entered discovery mode and was constantly looking for a Pairing device. It could also be caused by a bad wifi connection or some firmware issues.

The reasons for these issues have already been mentioned, and many Firestick users will face them. As a result, we will investigate a detailed guide to resolve it.

1. Change Your Firestick Remote Battery

You can resolve this issue by replacing your Firestick remote. The battery must occasionally be replaced. Your remote will repeatedly turn on and off due to a low battery.

As a result, it will enter the discovery mode. Replace the battery instead. To avoid the yellow light blinking, always keep a supply of batteries on hand and change them on a regular basis.

2. Connect Firestick Remote

After replacing the battery, it will continue to flash yellow, and you can begin pairing your Firestick remote to your Firestick TV because it is already in Discovery mode. Simply follow the steps below to connect your FirestickFirestick Remote to your device.

1. Press and hold the Home Button for the 10 seconds
2. It will be looking for the Nearby device and automatically connect to the Firestick TV.

That’s all. You have successfully paired with the Firestick TV, and the Yellow light will be turned off. If your firestick remote blinks red while you press the Home button. Then you must replace your battery or attempt to reset the Firestick Remote.

3. Firestick Remote Reset

Changing the battery and pairing it to the Firestick TV usually solves the problem, but there may be a firmware issue with your remote in some cases. As a result, you must take care of it. To fix the problem, you must reset the Firestick remote and pair it with the TV. Let us proceed to the steps.

4. Power Cycle Router and Check Internet Connection

It is extremely unlikely that your router will experience a problem. Assume that none of these methods resolve the problem. Then it is the only option for resolving the problem.

1. Unplug the router’s power and ethernet cable.
2. Then, unplug your firestick tv.
3. Wait 120 seconds before reconnecting all cables and power.

It will largely resolve the connectivity problem between the Firestick and the remote.

SUGGESTED POSTS:

• How To Troubleshoot Sony TV Remote Not Working? (Proven Fixes!)
• How To Repair Samsung TV Volume Not Working? (12 Easy Fixes)
• Where Is The Power Button On My Vizio TV? Click Here

HOW TO PAIR YOUR FIRE TV REMOTE?

It’s always best to start small and work your way up. It could be as simple as having very low batteries. Check that your Fire Stick is inserted and operational, and that your TV is turned on. Hold down the Home button for a few seconds.

If the remote is in discovery mode, you will always see the yellow flashing light. It should blink gradually. A quick blink will indicate something else. If it blinks red at any point, you’ll need to replace the batteries before proceeding.

You should be prompted to finish the pairing process on your TV. Allow up to 30 seconds for the pairing process to be completed. If not, repeat the steps until your remote connects to your Fire TV.

HOW TO RESET YOUR FIRE TV REMOTE?

Except for the first generation Fire TV remote, all other –remotes reset in the same way. If you need to reset the remote, follow these steps:

1. Begin by unplugging your television and waiting 60 seconds.
2. After 60 seconds, you can begin resetting your remote. Hold down the Left, Menu, and Back buttons at the same time for about 15 seconds.
3. Wait a few seconds after releasing the buttons before removing the batteries.
4. Reconnect your TV and turn it back on.
5. After another 60 seconds, replace the batteries in your remote and press the home button.

If you have a first-generation remote, you’ll have to do a series of button presses before unplugging your TV.

1. Hold down the Home button. Press the Menu button nine times without letting go, then remove the batteries from the remote.
2. Unplug your television for 60 seconds. Replace the batteries in your remote while you’re waiting.
3. After plugging in the TV and turning it on, press and hold the Home button on your remote until the Home Screen appears.
4. Hold the Home button down for 40 seconds before releasing it. You’ll have to wait another 60 seconds for the setup to finish.

WHY IS MY FIRE TV CUBE FLASHING YELLOW?

My Fire TV Cube started flashing yellow the other day, and I had no idea why. As a smart home blogger, I had to investigate why this was happening. Here’s what I found out and what you can do to fix it.

A flashing or swinging yellow light on your Fire TV Cube indicates that you do not have an Internet connection or that your Echo device is not connected. Once you’ve restored normal operation to your Fire TV Cube, you’ll be able to reap the benefits of content streaming once more.

I’m no rocket scientist, but if your Cube is flashing or swinging a yellow light, it’s most likely due to a bad Wi-Fi connection.

That being said, if we want to know what else could be causing the flashing or swinging yellow light, there are only two possibilities.

• Amazon has notified you that your order has been delivered. Simply say, “Alexa, read my notifications.” When she responds, the yellow light will go out.
• There’s a reminder you overlooked.
• You do not have internet access. Because Alexa is a cloud service, she requires an internet connection.

What steps can I take to troubleshoot? 

1. Check your internet connection and make sure your phone and computer are both connected. Otherwise, restart your router.
2. If you’re using an Ethernet cable, unplug it and plug it back in (the Adapter can be found on Amazon).
3. If your Fire TV cube still displays a yellow light, restart it.
4. Unplug it for three seconds, then turn it back on and see how it goes.
5. Finally, look for Fire TV Cube updates.

RESET YOUR ROUTER

When you reset your router to troubleshoot a device, you must do so in the correct sequence.

1. Begin by unplugging any ethernet connections you have, then unplug your router.
2. After that, unplug all of your Fire TV devices.
3. After two minutes, reconnect your router, and once it has cycled back up, reconnect any ethernet cables and turn on your Fire TV.

This should resolve any connectivity issues between your Fire TV and the internet.

CONCLUSION: Fire TV Flashing Yellow Light

Fire TV devices––or Fire TVs––have been around for a while and are a great way to stream all of your favorite shows and movies. Each new release improves on the previous one. But, like everything else, Fire TV is prone to connectivity issues.

Signals from cell phones, televisions, tablets, and smart devices are constantly passing through the typical home. It is common for devices to experience connection problems.

If you see a flashing yellow light, the worst-case scenario is that you’ll have to factory reset your phone. In most cases, it’s just a connection problem, and following the steps above will resolve it.

FAQs About Fire TV Flashing Yellow Light