How To Sync Roku Remote Without Pairing Button? (Complete Guide To Follow)

As a tech enthusiast, I like to keep my electronics and gadgets up to date. Except for the TV in my home office, I have upgraded most of the electronics in my house to smart products over the last few years. Rather than upgrading the system, I chose a low-cost workaround and installed a Roku.

There are numerous other methods for converting a standard television into a smart television. I’ve been using a Roku device with my television for over a year. Despite the fact that the system had been running smoothly all along, the pairing button on the remote stopped working after a few months of use.

This means that whenever I replace the batteries, I must pair the remote with the device using methods other than the pairing button. After extensive research, I discovered a few methods for pairing your remote with the Roku device without using the pairing button.

To save you time and effort, I’ve detailed what you can do if your pairing button isn’t working or is broken in this article. Check to see if the pairing button on the remote is in a different location. If that doesn’t work, get an IR remote that works with your Roku because it doesn’t require pairing.

The last options are to replace your remote and use the Roku controller app. Roku players come with a pre-programmed remote control right out of the box. However, you may need to replace your remote from time to time. When you get a new remote, you’ll need to pair it with your player so it can sync.

If the remote has a pairing button, the process is fairly straightforward. But what if your Roku remote lacks a pairing button? Without a pairing button, you will need to sync your Roku remote manually. The process is quite simple – pointing the remote to the Roku player and pressing a button to get it recognized.

SYNC ROKU REMOTE WITHOUT PAIRING BUTTON

The tech junkie in me desires to always have the most up-to-date technological devices. With the exception of the TV in my home office, I’ve replaced the majority of my home’s equipment with smart devices in the last few years.

Instead of purchasing a new machine, I installed a Roku as a temporary solution. There are also alternative methods for converting a traditional television into a smart television. It’s been nearly a year since I first hooked up a Roku to my TV and began streaming content to it via HDMI.

The pairing button on the remote stopped working after a few months of use, despite the fact that the system had been working fine up until that point. Because the batteries need to be changed frequently, I have to use alternate methods of pairing the remote with devices that do not have a pairing button.

It took me a while to figure out how to connect your Roku remote to the streaming player without using the pairing button. If your pairing button is broken or broken, I’ve included instructions in this post to save you time and effort.

Look to see if the remote has a separate pairing button. Purchase an IR remote control that is compatible with your Roku as it does not need pairing if that does not work. The only other alternatives are to buy a new remote or use the Roku controller app.

ROKU REMOTE HAS THE PAIRING BUTTONiN A DIFFERENT LOCATION

If you are a new Roku user, you may have difficulty locating the pairing button. Roku devices include two types of remotes:

• Standard infrared remote
• Improved “point-anywhere” remote control

A pairing button is not included with the standard IR remote. It is a standard remote that must be pointed at the Roku device in order to relay commands. The improved “point-anywhere” remote, on the other hand, includes a pairing button.

It connects to the Roku device via Wi-Fi and can control it even if there are obstacles between the TV and the remote. Open the battery compartment on your Roku remote to see if it has a pairing button. The pairing button can be found near the bottom of the battery compartment.

It will be in the center or bottom right, depending on the model of the remote. The default IR remote does not have a pairing button. To send commands to the Roku device, point the remote at it. The upgraded “point-anywhere” remote has a pairing button. Because of the Wi-Fi connection, the remote control works even if a barrier separates your TV from the Roku device.

Open the battery compartment on your Roku remote to see whether it has a pairing button. To link the device, press and hold the pairing button at the bottom of the battery case. The bottom right or center of the remote control depends on the model.

SUGGESTED POSTS:

• The Top 6 Best WiFi Thermometer You Must Purchase See More
• The 5 Best MMCX Cable To Buy? (Detailed Review)
• How To Fix Vizio TV Wont Turn On White Light is On Issue? (8 Easy Fixes)

IR ROKU REMOTES DON’T NEED TO BE PAIRED

As previously stated, not all Roku remotes include pairing buttons; therefore, not all Roku remotes must be paired with the Roku device. You are not permitted to pair an IR-censored remote with the system.

The remote has been pre-calibrated for the system. To relay commands, all you have to do is point it at the Roku device. They work in the same way that standard remotes do.

ROKU MODELS THAT SUPPORT IR REMOTES

Almost all Roku products, except Roku sticks, are compatible with IR remotes. Hence, if you have a Roku remote that does not come with a pairing button, it is most likely an IR remote. Some Roku devices that support IR remotes are:

• Roku LT
• Roku Express
• Roku Express+
• Roku N1
• Roku HD
• Roku XD and XDS
• Roku 1, 2 and 3
• Roku Premiere
• Some Roku TVs
• Roku 2 HD
• Roku XS

YOUR PAIRING BUTTON DOES NOT WORK

Despite the fact that the Roku remote pairing button is safely tucked away in the battery compartment, it can be damaged if the remote is damaged due to liquid spillage or dropping. Either of the aforementioned scenarios can render the pairing button ineffective.

As a result, you will be unable to connect the remote to the Roku device via the button. You can, however, connect the remote using the Roku controller app. The method is discussed further in the article.

As a workaround until you can successfully troubleshoot your Roku remote, you can stream content from your iPhone to your TV in seconds, or use Chromecast to cast content from other phones or laptops to your TV.

The Roku remote pairing button, despite being carefully hidden in the battery compartment, may be broken if the remote is spilled on or dropped. In any of the scenarios described above, the pairing button may become ineffective.

The button will not function in order to connect the remote to the Roku player. In contrast, the Roku controller app can be used to connect the remote. The approach will be discussed later in the piece. As a workaround, use AirPlay to broadcast content from your iPhone or Chromecast to project content from other phones or laptops to your TV while you fix your Roku control.

REPLACE YOUR ROKU REMOTE

If your remote has been damaged by water or a drop and is no longer working properly, you can always replace it. It should be noted, however, that attempting to repair an old malfunctioning device is always risky.

As a result, if your Roku remote is unstable, keeps disconnecting, and the pairing button is not working, it is time to replace it. The Roku remote, unlike the Roku device, suffers from wear and tear as a result of rough handling. As a result, it will most likely fail before the Roku device.

Roku’s remotes are constantly being upgraded to include new features. Thus, purchasing a new remote will not only be a safer option, but you will also be able to experiment with new features. You can also look for smart remote controls that include RF blasters.

They work flawlessly and can serve as a suitable replacement for your Roku remote or any other standard remote. If the remote control has been damaged by water or drops and no longer works properly, it can be replaced.

However, keep in mind that attempting to repair an old, broken device can be dangerous. As a result, if your Roku remote is untrustworthy, frequently disconnects, or lacks a pairing button, it’s time to replace it.

The Roku remote, unlike the Roku player, is vulnerable to damage from rough handling. The Roku device could fail first, but this is not guaranteed. Roku’s remotes are constantly being updated with new features.

As a result, buying a new remote will not only be a wise investment, but it will also allow you to take advantage of the most recent features. Instead, look for smart remote controllers with RF blasters. They work well and are an excellent substitute for your Roku remote or any other type of remote.

Alternative Video: How To Pair A Roku TV Remote Without Pairing Button?

UNPAIR YOUR OLD ROKU REMOTE

If you want to pair a new remote or a remote from another Roku device, you must first unpair the previous Roku remote. Otherwise, the newly paired remote will be inoperable. The pairing button is required to unpair the old remote. Take the following steps:

1. At the same time, press the home, pairing, and back buttons.
2. Continue to press until the LED light blinks three times.
3. Wait a few moments. The remote will unpair on its own.

If the pairing button on the old remote does not work, you can unpair it by removing the remote’s batteries. Wait at least two minutes before replacing the batteries.

PAIR YOUR NEW ROKU REMOTE

To pair a Roku remote with a Roku device, the pairing button must be intact. If you have a new Roku remote, use these steps to pair it with the Roku device.

1. Turn on the television.
2. Turn on the Roku player.
3. Insert the batteries into the remote after the Roku logo appears.
4. In the battery compartment, press the pairing button.
5. Continue to press until the pairing light begins to flash.
6. The pairing process will be initiated automatically by the device. This could take a few moments.

If the pairing button on your Roku remote is broken or damaged, you can pair it using the Roku controller app. If your Roku Remote does not pair, try resetting it and checking the batteries.

USE THE ROKU CONTROLLER APP

The Roku controller app is a one-stop shop that allows you to control your Roku device even if you don’t have a Roku remote. It also allows you to pair a Roku remote with the device if the pairing button on the remote is damaged. Install the Roku app on your tablet or smartphone.

It is available in both the App Store and the Google Play Store. Check to see if your smartphone or tablet and the Roku device are both connected to the same network.

1. Launch the app.
2. Navigate to the settings menu.
3. ‘Remotes And Devices’ should be selected.
4. Select ‘Pair New Device.’

The Roku remote will be detected automatically by the app. If this method does not work for you, you can try another.

1. Using the buttons on the home screen of the controller app, go to the settings of your Roku device.
2. Select Remote from the settings.
3. Click on ‘Pair Remote’.
4. Press the right arrow. This will open a set of instructions.
5. Follow these instructions to connect your remote to the Roku device.

If neither method works, there is a chance that your Roku remote has a hardware problem. You might have to buy a new one. Even if you don’t have a Roku remote, you can use the app to control your Roku player. Even if the pairing button on your Roku remote is broken, you can still use it to connect to the device.

Download the Roku app to your tablet or smartphone. It’s available on the App Store and Google Play. Examine whether your smartphone or tablet is connected to the same network as your Roku box. The app will immediately detect the Roku remote. If this does not work, try a different approach.

CONCLUSION

If your Roku device isn’t working properly and the performance is erratic, you can always file a warranty claim. However, you will be unable to claim the warranty if the device is physically or water damaged. In this case, you’ll need to buy a new Roku remote.

Furthermore, if you do not believe your remote has a hardware problem, the unstable connection and performance could be caused by an unstable Wi-Fi connection. This is due to the fact that enhanced Roku remotes communicate with the device via Wi-Fi.

Hence, if the Wi-Fi is not working properly or if the signals are scarce, there is a chance that this is affecting the stability of the connection between the Roku remote and the Roku device. Also, if you’re unpairing your remote because it’s overheating, then keep in mind that you need to wait a couple of minutes before touching the batteries to let it cool down.

Have you misplaced or broken your Roku remote? Switching to a new one will necessitate pairing it with your device. The preceding article discusses how to pair an IR remote with your Roku player without using a pairing button.

It should be noted, however, that IR remotes only work with devices that have infrared sensors. Any other device will necessitate the purchase of an enhanced remote or the use of the Roku app to transform your smartphone into one.

FAQs About Roku Remote Syncing